Welding, Cutter, and Welder Careers in Arizona

**Requisition ID: 166051**

**Position Summary**

Plan, lay-out, weld, install, test and repair all types of pipe and similar tubular products in accordance with applicable plans, specifications, welding codes and industry standards

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Plan, diagram and lay-out for pipe welder’s work

• Coordinate with field labor crew for efficient installations

• Position the weld set up, fit the piping and perform welds involving a high degree of precision independently

• Lay-out, and assemble pipes accurately and according to production standards, quality requirements, safety requirements, code, design, and specifications

• Make welding repairs and substandard welds

• Assist with coordination of any Pre-Fabrication layout or installation

• Assist with rigging of material

• Operate air arc gouger, grinder, stress relieving machine, and other industry machines, tools and equipment

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

+ The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing

_We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._

Company: TIC_Craft

Resolute Performance Iron is currently looking for structural fitters. General responsibilities and qualifications listed below.

Shop Fitter/Welder Scope and Responsibilities

+ Use MIG welding equipment to manufacture parts and assemblies in accordance with AISC and job specific standards.

+ Supply quality parts and assemblies from jigs and fixtures for the welders to complete.

+ Work on special projects as required.

+ Support QC by taking feedback into their work and making the necessary changes for a quality product.

+ Operate necessary equipment to perform tasks – includes but not limited to cranes, forklifts, mag drills, torches, hand tools, power tools, etc.

+ Arrange parts and pass along important information to welders.

+ Review fabricated assemblies for accuracy against drawings.

+ Participate and attend safety and company meetings.

+ Perform other duties as required by your manager.

Qualifications

+ Minimum 2 years of experience fitting/welding.

+ Familiar with jigs and fixtures. Familiar with hand and power tools.

+ The ability to read blueprints/engineered drawings.

+ Able to lift and carry 50lbs without assistance.

+ Must pass a drug test and weld test.

Powered by JazzHR

**Description**

**Who We Are:** Shambaugh & Son L.P., a wholly-owned indirect subsidiary of EMCOR Group, Inc., is a customer-driven, single-source, self-performing construction/engineering firm. We specialize in the Design-Build method of construction resulting in fast-track delivery of the project improvements to our customers. We are one of the largest specialty contractors in the U.S. and the only one with all eight M.E.P (Mechanical, Electrical, Process, Automation, Refrigeration, HVAC, Plumbing, and Fire Protection) design and installation capabilities in-house. We perform more than $1 billion of construction projects per year with over 3,000 employees throughout 50 states from our home office in Fort Wayne, Indiana.

Our success has been driven by our ability to attract and retain dedicated, knowledgeable and seasoned professionals to become part of the Shambaugh team, as we continue to build on our 90+ year Shambaugh success story.

At Shambaugh, we recognize people as our most important resource and it is our mission to produce the industry’s highest level of quality services and productivity on every project in order to develop repeat customers, maximize return on investment, and provide professional growth opportunities for people in the organization.

**Job Summary:** Progressive Pipe is seeking a Fabricator in our fire fabrication shop in Kingman, AZ. In this position, you will be responsible for fabricating pipe for fire protection systems by cutting, threading, weld checking each pipe and then bundling pipe for each job.

**Essential Duties and Responsibilities:**

+ Use various machinery

+ First and second shift available

+ Study and interpret assembly instructions

+ Listen to directions from supervisors

+ Fabricate and assemble pipe per instructions

+ Read parts list and determine if all parts are present

+ Assemble tools, materials, and various components

+ Interpret measurements

+ Verify specifications

+ Ensure all parts are fitted and screwed in properly

+ Resolve assembly and production issues, with managements assistance

+ Troubleshoot malfunctions and perform repairs as needed

+ Ensure working environment is clean and safe

+ Report errors in production

+ Other duties as assigned

**Qualifications:**

+ Read a tape measure down to a ¼”.

+ Be dependable

+ Good attendance and a positive attitude are critical for this position

+ Good work ethic and a willingness to learn

+ Must be able to communicate ideas, thoughts, etc. both verbally and in written form

+ Must be able to work Saturday (will count against attendance record if missed).

+ Must be 18 years or older

+ Attention to detail

+ Ability to follow directions and communicate with others

+ Ability to push, pull, or lift up to 50 lbs regularly

+ Ability to stand, bend, twist, and walk for 8-12 hour shifts

+ Ability to pass a drug test

**Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies** list open positions here. (https://recruiting.ultipro.com/EMC1002EMCGI/JobBoard/cc563430-39f7-4c82-bdfe-62f295bd857a/?q=%22Shambaugh+%26+Son%22&o=relevance&w=&wc=&we=&wpst=) **Please check our available positions to confirm that a post or email is genuine.**

**EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal process -- it is probably fraudulent.**

**Shambaugh is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodations for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form.**

\#ppf

\#LI-AC1

\#LI-onsite

**Description**

**Who We Are**

Shambaugh & Son L.P., a wholly-owned indirect subsidiary of EMCOR Group, Inc., is a customer-driven, single-source, self-performing construction/engineering firm. We specialize in the Design-Build method of construction resulting in fast-track delivery of the project improvements to our customers. We are one of the largest specialty contractors in the U.S. and the only one with all eight M.E.P (Mechanical, Electrical, Process, Automation, Refrigeration, HVAC, Plumbing, and Fire Protection) design and installation capabilities in-house. We perform more than $1 billion of construction projects per year with over 3,000 employees throughout 50 states from our home office in Fort Wayne, Indiana.

Our success has been driven by our ability to attract and retain dedicated, knowledgeable and seasoned professionals to become part of the Shambaugh team, as we continue to build on our 90+ year Shambaugh success story.

At Shambaugh, we recognize people as our most important resource and it is our mission to produce the industry’s highest level of quality services and productivity on every project in order to develop repeat customers, maximize return on investment, and provide professional growth opportunities for people in the organization.

**Job Title** Welder

**Job Summary**

Use a universal welder to make cuts and welds on steel pipe.

**Essential Duties and Responsibilities**

• Read blueprints and drawings

• Take measurements to plan layouts

• Set up welding machine according to specifications

• Weld components using semi-automatic welding equipment in various positions

• Maintain equipment in a condition that does not compromise safety

• Test all machine welds to ensure quality

• Weld by hand any leaks found in quality penetration die test

• Other duties as assigned

**Qualifications**

• 1 plus years of welding experience

• Read a tape measure

• Pipe welding and welding certificates a plus

• Be dependable

• Good attendance and a positive attitude are critical for this position

• Good work ethic and a willingness to learn

• Must be able to communicate ideas, thoughts, etc. both verbally and in written form

• Must be able to work Saturday (will count against attendance record if missed).

• Must be 18 years or older

• Attention to detail

• Ability to follow directions and communicate with others

• Ability to push, pull, or lift up to 50 lbs regularly

• Ability to stand, bend, twist, and walk for 8-12 hour shifts

• Ability to pass a drug test

Shambaugh is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodations for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form.

\#ppf

\#LI-AC1

\#LI-onsite

**Description**

**Who We Are:** Shambaugh & Son L.P., a wholly-owned indirect subsidiary of EMCOR Group, Inc., is a customer-driven, single-source, self-performing construction/engineering firm. We specialize in the Design-Build method of construction resulting in fast-track delivery of the project improvements to our customers. We are one of the largest specialty contractors in the U.S. and the only one with all eight M.E.P (Mechanical, Electrical, Process, Automation, Refrigeration, HVAC, Plumbing, and Fire Protection) design and installation capabilities in-house. We perform more than $1 billion of construction projects per year with over 3,000 employees throughout 50 states from our home office in Fort Wayne, Indiana.

Our success has been driven by our ability to attract and retain dedicated, knowledgeable and seasoned professionals to become part of the Shambaugh team, as we continue to build on our 90+ year Shambaugh success story.

At Shambaugh, we recognize people as our most important resource and it is our mission to produce the industry’s highest level of quality services and productivity on every project in order to develop repeat customers, maximize return on investment, and provide professional growth opportunities for people in the organization.

**Job Summary:** Progressive Pipe is seeking a Fabricator for the Fire Fabrication Shop in Glendale, AZ. In this position, you will be responsible for fabricating pipe for fire protection systems by cutting, threading, weld checking each pipe and then bundling pipe for each job.

**Essential Duties and Responsibilities:**

+ Use various machinery

+ Study and interpret assembly instructions

+ Listen to directions from supervisors

+ Fabricate and assemble pipe per instructions

+ Read parts list and determine if all parts are present

+ Assemble tools, materials, and various components

+ Interpret measurements

+ Verify specifications

+ Ensure all parts are fitted and screwed in properly

+ Resolve assembly and production issues, with managements assistance

+ Troubleshoot malfunctions and perform repairs as needed

+ Ensure working environment is clean and safe

+ Report errors in production

+ Other duties as assigned

**Qualifications:**

+ Read a tape measure down to a ¼”.

+ Be dependable

+ Good attendance and a positive attitude are critical for this position

+ Good work ethic and a willingness to learn

+ Must be able to communicate ideas, thoughts, etc. both verbally and in written form

+ Must be able to work Saturday (will count against attendance record if missed).

+ Must be 18 years or older

+ Attention to detail

+ Ability to follow directions and communicate with others

+ Ability to push, pull, or lift up to 50 lbs regularly

+ Ability to stand, bend, twist, and walk for 8-12 hour shifts

+ Ability to pass a drug test

**Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies** list open positions here. (https://recruiting.ultipro.com/EMC1002EMCGI/JobBoard/cc563430-39f7-4c82-bdfe-62f295bd857a/?q=%22Shambaugh+%26+Son%22&o=relevance&w=&wc=&we=&wpst=) **Please check our available positions to confirm that a post or email is genuine.**

**EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal process -- it is probably fraudulent.**

**Shambaugh is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodations for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form.**

\#ppf

\#LI-AC1

\#LI-onsite

**Pipe welders needed in Phoenix, AZ $28-40HR - Weekly pay!**

A growing construction company is seeking tig welders out in the Phoenix, AZ area. Tig welders will need to know how to perform 6g full TIG weld. If you're someone who has experience in this setting and is looking for work, please apply!

**Job description:**

+ Weld purging

+ 2+ years experience

+ Stainless Steel Unlimited 6g full TIG

+ 12-20 gauge stainless steel experience

**Skills Desired**

+ TIG Welder for production welding of tubular products (steel, stainless and aluminum).

+ Product manufactured to customer drawings, specifications, or other forms of instruction.

+ Use mechanical drawings and instruction to correctly setup weld

+ Execute proper welding for metal parts Process inspection, certification, and documentation

+ Use manual and power tools for grinding parts as needed

+ Frequent walking, standing, kneeling/squatting, bending/stooping, pushing/pulling, twisting and lifting for 8-12 hours per day

**Shift**

+ M-Saturday 5am start time

+ 50 hour work weeks

**Work Environment + Benefits:**

+ Working in shop and then may move onto field welding

**Pay and Benefits**

The pay range for this position is $28.00 - $40.00

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision

• Critical Illness, Accident, and Hospital

• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available

• Life Insurance (Voluntary Life & AD&D for the employee and dependents)

• Short and long-term disability

• Health Spending Account (HSA)

• Transportation benefits

• Employee Assistance Program

• Time Off/Leave (PTO, Vacation or Sick Leave)

**Workplace Type**

This is a fully onsite position in Phoenix,AZ.

**Application Deadline**

This position will be accepting applications until Jan 17, 2025.

**About Aerotek:**

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

POSITION SUMMARY: The Container Welder/ Fabricator repairs, paints and performs maintenance to containers and roll-off boxes.

PRINCIPAL RESPONSIBILITIES:

+ Performs repairs and maintenance on front, rear and roll-off containers

+ Weld steel and aluminum components using MIG and ARC welding Equipment.

+ Fabricates steel components using a brake and shear.

+ Cuts steel using a plasma cutter or torch.

+ Fabricates steel components for hoppers, containers and compactors.

+ Installs lids and wheels on containers.

+ Paints repaired containers.

+ Follows all safety policies and procedures.

+ Completes required paperwork.

+ Install company and safety decals in accordance with company standard diagram on containers and roll-off boxes.

+ Performs other job-related duties as assigned.

+ Refer more complex repairs to the Supervisor.

QUALIFICATIONS:

+ High School Diploma or G.E.D.

+ Certified welder.

+ Advanced knowledge of mig &stick welders, plasma cutter, and airless paint Sprayers. Familiar with basic use of hand tools.

+ Excellent written and verbal communication skills.

+ Ability to follow directions with minimal supervisory involvement.

MINIMUM REQUIREMENTS:

+ Minimum of 1 year welding experience OR COMPLETION OF A WELDING PROGRAM.

**Rewarding Compensation and Benefits**

Eligible employees can elect to participate in:

• Comprehensive medical benefits coverage, dental plans and vision coverage.

• Health care and dependent care spending accounts.

• Short- and long-term disability.

• Life insurance and accidental death & dismemberment insurance.

• Employee and Family Assistance Program (EAP).

• Employee discount programs.

• Retirement plan with a generous company match.

• Employee Stock Purchase Plan (ESPP).

_The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company._

EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

**ABOUT THE COMPANY**

Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.

In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.

Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.

Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.

Our company values guide our daily actions:

+ **Safe** : We protect the livelihoods of our colleagues and communities.

+ **Committed to Serve** : We go above and beyond to exceed our customers’ expectations.

+ **Environmentally Responsible:** We take action to improve our environment.

+ **Driven** : We deliver results in the right way.

+ **Human-Centered:** We respect the dignity and unique potential of every person.

We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods.

**STRATEGY**

Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets.

We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.

With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.

**Recycling and Waste**

We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.

**Environmental Solutions**

Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.

**SUSTAINABILITY INNOVATION**

Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.

The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.

We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.

**RECENT RECOGNITION**

+ Barron’s 100 Most Sustainable Companies

+ CDP Discloser

+ Dow Jones Sustainability Indices

+ Ethisphere’s World’s Most Ethical Companies

+ Fortune World’s Most Admired Companies

+ Great Place to Work

+ Sustainability Yearbook S&P Global

1501 S Euclid Ave Tucson Arizona 85713

**_Why Valmont_**

**We’re Here to Move the World Forward.**

Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better.

Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now.

**1st Shift Hours - Monday-Friday - 7:00 am-3:30 pm**

**A Brief Summary of This Position:**

Valmont Industries is a leader in communications infrastructure solutions including towers, small cell and concealment products. The position of Fabricator will be responsible for the layout, assembly, and finish of architectural structures of various styles used in the telecom industry as concealment for wireless communication equipment. Each concealment structure is uniquely designed to fit the customer’s needs and the preferred candidate would be able to read and interpret blueprints, then use the skills and tools of the trade to bring the desired structure to life.

**Essential Functions:**

The key essential functions, responsibilities and requirements of this role are:

+ Planning, layout, and assembly of the designed structure (frame walls, install FRP, plywood, etc., and finish to specs)

+ Ability to stand for long periods, climb, pull and lift heavy objects safely

+ Ability to wear all required PPE including a respirator

+ Keep workplace clean, tidy and safe

+ Occasional use of material handling equipment such as forklift and overhead crane (training provided)

+ Attention to detail

+ Good communication skills

+ Help with other tasks as needed (i.e., sand, paint, package, etc.)

+ Ability to work with others as a team

**Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):**

+ Read blueprints and schematics to ensure project accuracy

+ Frame structural members in a plumb, level and square manner

+ Ability to operate tools such as saws of various types, drills and drill presses, grinders and various other hand/power tools safely

+ Ability to access the quality of building materials such as wood, FRP, conventional materials, composites, etc.

+ Cut, shape, and smooth building materials such as lumber and FRP

+ Assess quality of work and correct, repair, rebuild, etc. as needed to meet quality standards

+ Ability to read a tape measure to 1/32”

**Highly Qualified Candidates Will Also Possess These Qualifications:**

+ 2+ years of professional carpentry experience a plus

+ Experience using advanced, fast setting adhesives

**Working Environment and Physical Efforts:**

Work is typically performed in a manufacturing environment in a non-climate-controlled facility with occasional outdoor work. The incumbent is regularly required to stand for extended periods of time. Environment is fast paced and demanding most of the time. No travel requirements for this position.

**Benefits**

Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family’s overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following:

+ Healthcare (medical, prescription drugs, dental and vision)

+ 401k retirement plan with company match

+ Paid time off

+ Employer paid life insurance

+ Employer paid short-term and long-term disability including maternity leave

+ Work Life Support

+ Tuition Reimbursement up to $5,250 per year

+ Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more

Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

If you have a disability and require any assistance in filling out the application for employment email [email protected].

Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology.

Valmont serves two primary markets — agriculture and infrastructure — and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries.

That’s what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world.

+ That’s the value we add.

Position Value Proposition

Working for a world-class leader in building structures and bridges, a Schuff Steel Production Welder brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge, and industrial sectors. Critical to the production process this position welds a large variety of materials by FCAW, SMAW, GMAW, and SAW. The production welder welds in all positions utilize a high degree of proficiency while utilizing full skills of the trade including knowledge of common heat reactions of structural metals and is certifiable. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.

Core Responsibilities

+ Follows applicable welding procedures ( AWS, AISC)

+ Welds on ground level, above ground and below ground, in any required position.

+ Chips peens and grinds material to prepare for welding or finish.

+ Welds structural, bridge, and industrial materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.

+ Perform gouging and scarfing as needed.

+ Capable of passing welding test in accordance to AWS D1.1.

+ Transport material by crane as needed and required.

+ Keeps work area organized and clean.

+ Perform other routine duties per management direction.

+ Must adhere to and follow all safety rules and PPE requirements

Qualifications

Required qualifications (Knowledge, Skills, and Abilities) to perform essential functions of this position:

Core Competencies:

+ Action-Oriented enjoys working hard; is action-oriented and full of energy for the things he/she sees as challenging; not fearful of acting with a minimum of planning; seizes more opportunities than others.

+ Functional / Technical skills has the functional and technical knowledge and skills to do the job at a high level of accomplishment

+ Integrity and Trust is widely trusted; is seen as a direct truthful individual; can present the unvarnished truth in an appropriate and helpful manner; keeps confidences; admits mistakes; doesnt misrepresent him/herself for personal gain.

+ Driven for Results can be counted on to exceed goals successfully; is consistently one of the top performers; very bottom-line oriented steadfastly pushes self and others for results

+ Listening / Communicating practices attentive and active listening, has the patience to hear people out; can accurately restate the opinions of others even when he/she disagrees

Education/Training - Work Experience

High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass a required weld test.

Specialized Knowledge Certificates & Licenses

+ Equipment Knowledge & Skills a variety of hand tools and welding equipment

+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.

+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test

Software & Technology

The position will require the frequent use of Kronos for timekeeping

Employee Value Proposition

Working for a world-class leader in building structures, a Schuff Steel Production Fitter-Welder brings his/her expertise and knowledge in steel and/or bridge fabrication to build some of the most complex and high profile projects in the commercial building, bridge, and industrial sectors. Critical to the production process this position assembles and fits drawing dimensions of the various structural, plate, and mechanical materials. Welds a large variety of materials. Welds in all positions with a high degree of proficiency utilizing full skills of the trade including knowledge of common heat reactions of structural metals, and are certifiable. The production fitter utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge of blueprints and common heat reactions of structural metals. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.

In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.

Core Responsibilities

+ Follows applicable welding procedures (AWS, AISC)

+ Welds on the ground level, above ground and below ground, in any required position.

+ Chips peens and grinds material to prepare for welding or finish.

+ Welds structural materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.

+ Straightens materials by heat or flame.

+ Perform gouging and scarfing as needed.

+ Must take and pass welding test in accordance to AWS D1.1.

+ Receives instructions, prints, sketches and work orders.

+ Reads and interprets blueprints and plans the fitting operation.

+ Directs and assists in handling and spreading of material, assembling material into required relationships according to detail drawings; handling and placing detail material in assembly, placing bolts, drift pins and other fastening deceives in proper locations.

+ Lays out work lines or fits up jigs for positioning material when required; checks, squares, and scribes all detail connections.

+ Responsible for work conforming to drawings and notes thereon.

+ Cleans up material by grinding or chipping.

+ Burns and tack welds for assembly purposes. Burns, copes, bevels and straightens material. Does minor layout.

+ Spot paints for identification marks.

+ Moves material to and from the work area. Moves welding equipment to material when necessary. Positions component parts on a table held by a fixture or jib, tacking when required.

+ Maintain clean and organized work area.

+ Perform other routine duties per management direction.

+ Must adhere to and follow all safety rules and PPE requirements

Education/Training - Work Experience

High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test and fitter test.

Specialized Knowledge – Certificates & Licenses

+ Equipment Knowledge & Skills – use a variety of hand tools and welding equipment

+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and blueprints.

+ Mathematical Skills: Ability to add, subtract, multiply and divide into all units of measure.

+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test

DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan

*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.